Factory wholesale Pressure Measurement Film - Pressure Measurement Film 1/2/3/4/5LW MW MS

Factory wholesale Pressure Measurement Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative

Short Description:

Product Detail

Product Tags

Feedback (2)

We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit forInjection Molding Pressure Test Film,Interior Film,Blank Magnetic Cards, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!

Factory wholesale Pressure Measurement Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative Detail:

Product list

(1)Product code：Low Pressure 1LW

Width：270mm

Length：10m

Pressure Range(Mpa)：2.5-10

Type：Two-sheet

(2)Product code：Super Low Pressure 2LW

Width：270mm

Length：6m

Pressure Range(Mpa)：0.5-2.5

Type：Two-sheet

(3)Product code：Ultra-Super Low Pressure 3LW

Width：270mm

Length：5m

Pressure Range(Mpa)：0.2-0.6

Type：Two-sheet

(4)Product code：Extreme Low Pressure 4LW

Width：310mm

Length：3m

Pressure Range(Mpa)：0.05-0.2

Type：Two-sheet

(5)Product code：Ultra Extreme Low Pressure 5LW

Width：310mm

Length：2m

Pressure Range(Mpa)：0.006-0.05

Type：Two-sheet

(6)Product code：Medium Pressure (MW)

Width：270mm

Length：10m

Pressure Range(Mpa)：10-50

Type：Two-sheet

(7)Product code：Medium Pressure (MS)

Width：270mm

Length：10m

Pressure Range(Mpa)：10-50

Type：Mono-sheet

Function

Indicating pressure distribution by color uniformity; color density indicates pressure values directly.

Applications

Pressure Measurement Film is widely used in the area of Electronics circuit, LCD, Semiconductors, Automotive, Lithium-ion battery and Installation of mechanical equipment,etc.

Cautions

(1)L film reacts sensitively even to a very small pressure, do not press and rub it before use, handle gently.

(2)When storing and taking from the box, both sides of the plugs should be held by hand, and the center of the roller should not be pressed to avoid affecting the test effect .

(3)Recommending temperature of 1/2/3LW and MS/MW is 20℃-35℃, humidity is 35%RH-80%RH, 4/5LW is 15℃-30℃, humidity is 20%RH-75%RH. The accurate of the result may be influenced if out of this region.

(4)With different temperature, humidity and applying pressure condition when use, the color will be also different .

(5)Clear the measuring place before use, if water, oil or some other things present on the surface of film, maybe can not show the normal color .

Use under special circumstances: a)When pressurized at high temperature for a long period, heat insulation material should be added to the outside of the film to ensure the sample is not affected by temperature. b) In water or oil circumstances, the sample should be put in a waterproof, oil-proof bag then pressurized to prevent the sample from contacting with water and oil, which will affect the color effect .

(6)pressure measurement film is not reusable.

(7)Use within the given validity period.

Product detail pictures:

Related Product Guide:

we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for Factory wholesale Pressure Measurement Film - Pressure Measurement Film 1/2/3/4/5LW MW MS – Lucky Innovative , The product will supply to all over the world, such as: Adelaide , Montreal , Uruguay , Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.

Force Distribution Measurement Film